Open Access Pub publishes peer-reviewed, free-to-read open-access articles. Showing
articles matching Physicochemical — open any to read the full text,
or download the PDF or XML.
Aug 2023 DOI 10.14302/issn.2639-3166.jar-23-4682
Lee MyunggyuCorresponding author
Objectives The solid-liquid separation (SLS) process generally separates solid and liquid fractions in wastewater and livestock manure. The solid-liquid separation process is an essential pretreatment step for the recycling and purification of pig manure. This study has assessed the separation and/or reduction efficiency by various SLS processes used in pig farms. Methods Seven types of SLS processes (centrifuge, centrifuge (+coagulation agent), belt press (+ coagulation agent), drum screen, inclined screen, vibration screen, and screw press) were used on 11 pig farms and conducted a comparative analysis. As for the sample in this study, the pig raw manure before treatment, the separated liquid and solid manure after treatment of the SLS process collected, respectively. These samples were provided for pH, EC(electrical conductivity) moisture content, CODMn, BOD5, TN, TP, K, TS, SS, NaCl, and heavy metals analysis. Results and Discussion The belt press (+coagulation agent) process had the highest TS and SS reduction rate of 78.8% and 96.9%, respectively. The highest removal efficiency of TN and TP was41.0% and 94.2% by belt press (+coagulation agent) and centrifuge (+coagulation agent),respectively. The belt press (+coagulation agent) removed 59.4% and 66.0% of BOD5 and CODMn,respectively. The Zn and Cu were removed 100% and 98.6% by centrifuge (+coagulation agent).However, the drum screen, inclined screen, vibration screen, screw press, and centrifuge showed lower removal efficiency of nutrient contents, solids, Zn, and Cu than centrifugal and belt press processes with chemical coagulation. Conclusions The centrifugal and belt press separation processes that used chemical coagulation showed much more removal efficiency of nutrient contents, solids, and metals like Zn and Cu. Although SLS with chemical coagulants is an effective pre-treatment process for liquid manure treatment and helps removal effect for suspended solids, nutrients, and heavy metals, further studies are needed on how it affects biological or chemical processing processes that are linked.
Feb 2021 DOI 10.14302/issn.2377-2549.jndc-21-3722
Jana SnehasisCorresponding author
Trivedi Science Research Laboratory Pvt. Ltd., Thane (W), Maharashtra, India.
Iron sulphate is used in the treatment of iron deficiency anaemia and other chronic disorders such as heart and kidney diseases. This study has the objective to analyze the impact of The Trivedi Effect®-Energy of Consciousness Healing Treatment on the physicochemical, spectroscopic and thermal properties of iron sulphate using various analytical techniques. In this, the test compound, i.e., iron sulphate was divided into two parts; one as control (without Biofield Energy Treatment), and the other as Biofield Energy Treated, which received the Biofield Energy Treatment remotely by the renowned Healer, Mr. Mahendra Kumar Trivedi. The PXRD analysis of the Biofield Energy Treated sample showed significant alterations in the range of -39.49 to 301.40% in the relative intensities, and from -15.40 to 33.36% in the crystallite sizes, compared with the control sample. The average crystallite size of the treated sample was also increased by 4.98% as compared to the control sample. The particle sizes in the treated sample at d10, d50, d90 and D(4,3) values were significantly increased by 67.12%, 47.72%, 33.18% and 42.01%, respectively; whereas, the specific surface area was significantly reduced by 38.39%, compared with the control sample. The TGA thermograms showed three steps of thermal degradation in which, the weight loss of Biofield Energy Treated sample in the first and second step was reduced by 5.82% and 16.09%, respectively, while, it was increased by 6.78% in the third step, compared to the control sample. The total weight loss in the treated sample was also reduced by 2.76%, along with slight alteration in the maximum thermal decomposition temperature, compared with the control sample. The DSC analysis showed the decrease in the melting temperatures of the 1st, 2nd and 4th peaks by 8.24%, 19.29%, and 0.61%, respectively, while 4.57% increase in the 3rd peak of the treated sample, compared with the control sample. The latent heat of fusion (ΔH) corresponding to the 1st, 2nd, 3rd and 4th peaks of the treated sample also showed alterations by -92.29, -86.29, 60.92, and 6.37%, respectively, compared with the control sample. The Trivedi Effect®-Consciousness Energy Healing Treatment might produce a novel polymorphic form of iron sulphate having increased crystallite and particle size along with enhanced thermal stability. It may help in improving the quality, safety and stability during the process of handling, storage, and shipment of the iron sulphate with better therapeutic response against iron deficiency anaemia.
Jul 2020 DOI 10.14302/issn.2379-7835.ijn-20-3471
Yewande BAMIGBOYE AdeolaCorresponding author
Department of Science Laboratory Technology, The Polytechnic, Ibadan. Oyo State, Nigeria.
Spices have been frequently added to foods since ancient times, not only to enhance the taste but also as preservatives and medicinal agents. Their usage may be of concern due to possible contamination during processing and handling. The aim of this study was to investigate the physicochemical properties and heavy metals concentrations in some indigenous spices sold at two main markets namely Bodija and Apata markets in Ibadan, Oyo State, Nigeria. A total of eight commonly consumed spices were purposely analyzed for their proximate and mineral composition, physicochemical properties and anti-nutrients contents. Proximate analyses showed that the spices to contained (fresh matter ‘As consumed’) moisture content ranging from 11.74g in thyme to 59.36g/100g in scent leaves. Crude protein, fat, fibre, ash and carbohydrate contents ranged between 3.72 – 15.07g, 1.31 – 8.28g, 1.96 – 11.38g, 1.11 – 7.81g, and 17.80 – 50.77g/100g sample, respectively. All the spices contained high levels of potassium (176.3 – 739.6 mg), sodium (60.6 – 317 mg), calcium (78.5 – 423.9 mg), magnesium (82 – 322.1 mg) and iron (5.78 – 20.10 mg), but low levels of heavy metals – copper (0.17 – 0.68 mg), and manganese (0.32 – 1.05 mg)/100g respectively. Flavonoid was the most abundant phytochemical, while terpene was the least phytochemical in all the samples. The samples had very low concentrations of anti-nutrients, and could pose no threat to human health, as their values were within the regulatory standard. The antioxidants and phytochemicals in the spices can help in building up immunity and prevention of non-communicable diseases, hence, their consumption should be encouraged.
May 2019 DOI 10.14302/issn.2379-7835.ijn-19-2831
Jana SnehasisCorresponding author
Trivedi Science Research Laboratory Pvt. Ltd., Thane (W), India
Pyridoxine HCl plays an important role in the human body as a coenzyme in the synthesis process of amino acids and neurotransmitters such as serotonin, norepinephrine, aminolevulinic acid, sphingolipids, etc. The objective of this study was to determine the effect of the Trivedi Effect®-Consciousness Energy Healing Treatment on the various physicochemical and thermal properties of pyridoxine HCl using various analytical techniques such. The study plan involved dividing the pyridoxine HCl sample into two parts, in which, the first part was not given any treatment (control sample), while the second part was provided the Consciousness Energy Healing Treatment by a renowned Biofield Energy Healer, Gopal Nayak and named as the Biofield Energy Treated pyridoxine. The particle size values of the treated pyridoxine was altered by -19.51% (d10), -11.92% (d50), 2.46% (d90), and -2.44% {D(4,3)}; whereas, the surface area was significantly increased by 18.92%, compared to the control sample. The powder X-ray diffraction data showed the remarkable increase in the peak intensities and crystallite sizes of the treated pyridoxine in the range from 8.81% to 21.57% and 9.64% to 17.85%, respectively compared to the control sample. Moreover, the treated pyridoxine also showed an increase in the average crystallite size by 13.69%, compared to the control sample. The total weight loss of the treated pyridoxine was significantly reduced by 13.35% during the thermal degradation; however, the residue weight was increased by 29.48% after degradation, in comparison to the control sample. The maximum thermal degradation temperature of the treated pyridoxine corresponding to 1st and 2nd peak was altered by 4.37% and 2.24%, respectively than the control sample. The latent heat of fusion of the treated pyridoxine was significantly increased by 5.89% compared to the control sample. Hence, it was assumed that the Trivedi Effect®-Consciousness Energy Healing Treatment might form a new polymorph of pyridoxine HCl that might be helpful in designing more efficacious pharmaceutical/nutraceutical product due to its better solubility, absorption, bioavailability, and thermal stability than the untreated sample.
Dec 2018 DOI 10.14302/issn.2328-0182.japst-18-2517
Nayak GopalCorresponding author
Trivedi Global, Inc., Henderson, USA
Silver sulfadiazine is a topical medicine that belongs to sulfa antibiotics class of drugs and used in treating wound infections in burn patients. The aim of this study was to determine the effect of Consciousness Energy Healing Treatment (the Trivedi Effect®) on the various properties of silver sulfadiazine with the help of modern analytical techniques. The sample was divided into two parts; the first part was not given any treatment and considered as a control sample, while the second part was provided the Consciousness Energy Healing Treatment by the Biofield Energy Healer, Gopal Nayak remotely, named as the treated sample. The powder XRD data showed significant alterations in the peak intensities of the treated sample ranging from-30.71% to 47.54% compared to the control sample. The crystallite size was altered ranging from -78.12% to 1.47%; and the average crystallite size was significantly reduced by 31.62% in the treated sample compared to the control sample. The particle sizes were decreased in the treated sample by 12.75%(d10), 4.98%(d50), 0.89%(d90), and 2.92%{D(4,3)}; thus, the specific surface area was significantly increased by 17.31% compared with the control sample. The latent heat of fusion and latent heat of decomposition were profoundly increased by 24.62% and 156.28%, respectively in the treated sample compared to the control sample. The total weight loss was increased by 3.08% and the residue amount was reduced by 4.44% in the treated sample compared to the control sample. Thus, the Trivedi Effect®-Consciousness Energy Healing Treated sample might form a new polymorph of silver sulfadiazine that possesses reduced particle size and improved thermal properties compared to the untreated sample. Therefore, the Biofield Energy treated sample can be used in nutraceutical/pharmaceutical formulation, which would show a better bioavailability and therapeutic response against various infections in comparison to the control sample.
Oct 2018 DOI 10.14302/issn.2379-7835.ijn-18-2419
Jana SnehasisCorresponding author
Trivedi Science Research Laboratory Pvt. Ltd.,Bhopal, India
Folic acid is essential in the body for the production of DNA and also plays various vital functions within the body. This study on folic acid was done to analyze the results of the Trivedi Effect® on its physicochemical and thermal properties with the help of analytical techniques. The method involves dividing the test sample into two parts. The first part was termed as a control sample, and no treatment was given to it; while the second part received the Biofield Energy Treatment remotely by a renowned Biofield Energy Healer, Gopal Nayak and termed as the treated sample. The study revealed that the particle sizes reduced by 7.01% (d10), 6.53% (d50), 8.37% (d90), and 15.99% {D(4,3)}, thus increased the surface area by 1.72%, in the treated sample compared with the control sample. The PXRD data showed changes in the peak intensities and crystallite sizes ranging from -36.81% to 113.41% and -15.79% to 318%, respectively, thus increased in the average crystallite size by 22.55% of the treated sample compared with the control sample. The TGA analysis of the treated sample revealed a 3.94% increase in total weight loss that resulted in the remarkable reduction in the residual amount by 14.99%, in comparison to the untreated sample. The latent heat of fusion (ΔHfusion) and latent heat of decomposition (ΔHdegradation) were significantly altered by -10.33% and 10.46%, respectively in the treated sample compared to the untreated sample. The study denoted that the Biofield Energy Treatment is a novel approach that could be used to develop some polymorph of folic acid and that might improve its solubility, dissolution, and bioavailability in comparison to the control sample. Hence, the treated folic acid in the nutraceutical/pharmaceutical formulations might be useful concerning better drug performance and efficacy.
Oct 2018 DOI 10.14302/issn.2328-0182.japst-18-2314
Jana SnehasisCorresponding author
Trivedi Science Research Laboratory Pvt. Ltd.,Bhopal, India
Silver oxide (Ag2O) has the antimicrobial properties, which is insoluble in most of the solvents and sensitive to light. Therefore, this study was performed to evaluate the impact of the Trivedi Effect®-Consciousness Energy Healing Treatment on the physicochemical and thermal properties of Ag2O powder using modern analytical techniques. The Ag2O sample was divided into two parts, one part of the sample was considered as the control sample, whereas the other part of the sample received the Biofield Treatment remotely by a renowned Biofield Energy Healer, Dahryn Trivedi and termed as a treated sample. The particle size values were significantly decreased by 26.70% (d10), 20.67% (d50), 18.7% (d90), and 20.57% D(43), hence, the specific surface area was significantly increased by 32.33% in the treated Ag2O sample than control sample. PXRD peak intensities and crystallite sizes were significantly altered from -94.93% to 6.18% and -54.19% to 54.89%, respectively, however, the average crystallite size was significantly decreased by 14.66% in the treated sample compared with the control sample. The latent heat of fusion of the treated Ag2O was significantly decreased by 61.12% compared with the control sample.The total weight loss was significantly increased by 49.34%, hence, the residue amount was 4.05% less in the treated sample than the control sample.These results suggested that the Trivedi Effect® might introduce a new polymorphic form of Ag2O which would offer better solubility, absorption, and bioavailability of the pharmaceutical formulations and also be advantageous for the pharmaceutical industry when using it as a raw material.
Sep 2018 DOI 10.14302/issn.2377-2549.jndc-18-2315
Jana SnehasisCorresponding author
Trivedi Science Research Laboratory Pvt. Ltd.,Bhopal, India
Selenium is an essential micronutrient required for healthy metabolism, as well as prevention, and treatment of selenium deficiency diseases. The experiment aimed to evaluate the influence of the Trivedi Effect®-Consciousness Energy Healing Treatment on the physicochemical and thermal properties of selenium using modern analytical techniques. The selenium sample was divided into two parts, one part of the test sample was called the control sample, while the second part of the test sample received the Biofield Treatment remotely by a renowned Biofield Energy Healer, Gopal Nayak, and was called the treated sample. The particle size values were significantly decreased by 37.69% (d10), 14.36% (d50), 4.31% (d90), and 11.58% D(43), hence, the specific surface area was significantly increased by 33.64% in the treated sample compared to the control sample. The PXRD peak intensities and crystallite sizes were significantly altered ranging from 5.23% to 100% and 75% to 111.7%, respectively; whereas 7.81% significantly decreased the average crystallite size in the treated sample than the control sample. The latent heat of fusion of the treated sample was significantly increased by 12.37% compared with the control sample.The results suggested that the Trivedi Effect® might generate a new polymorphic form of selenium which would offer better solubility, bioavailability and be thermally more stable compared with the control sample. The Biofield Treated selenium would be more useful to design novel nutraceutical/pharmaceutical formulations and might offer an enhanced therapeutic response against cardiovascular disease, cancer, neuromuscular disorders, diabetes, stress, aging, male infertility, viral diseases, degenerative ailments, etc.
Jul 2018 DOI 10.14302/issn.2638-4469.japb-18-2166
Chandra Gupta PrakashCorresponding author
University Institute of Pharmacy, Chhatrapati shahu Ji Maharaj University, Kanpur-208024, Uttar Pradesh India
Diospyros malabarica (Desr.) Kostel synonym Diospyros peregrina Gurke (Family: Ebenaceae) is a medium sized evergreen tree commonly known as Kendu in Assamese. The plant has ethnomedicinal significance and used by various ethnic communities of North-East India to treat various disorders like dysentery, diabetes, diarrhea malaria, ulcer and wounds. However, detailed scientific information is not available to identify the plant material, in order to ascertain its quality and purity. Therefore, the present work was carried out to perform morpho-anatomical and physicochemical analysis of D. malabarica stem bark. The bark is externally dark brown to black in color and rough having characteristics odor and astringent taste. The microscopy of bark reveals the presence of polygonal thick walled cork, 3-4 layered phellogen, 7-8 layered phelloderm, stone cells, phloem fibers and medullary rays. Stem bark powder showed thick walled cork cells, thick walled elongated phloem fibers, lignified stone cells and rhomboidal crystals of calcium oxalate. Further, physicochemical analysis of the bark power showed loss on drying, total ash, water soluble ash, and acid insoluble ash as 6.2, 5.6, 1.1, 2.45, and 5.7% w/w respectively. The alcohol and water soluble extractives values of the stem bark were 10.6 and 16.8% w/w respectively. The result of preliminary phytochemical screening indicates presence of triterpenoids, saponins, tannins, flavonoids and sterols. The findings of this study will facilitate pharmacognostic standardization of the plant material and aid in the preparation of an herbal monograph for the species.
Feb 2016 DOI 10.14302/issn.2379-7835.ijn-14-478
Ali Sahari MohammadCorresponding author
Department of Food Science and Technology, Faculty of Agriculture, Tarbiat Modares University, Tehran, Iran.
In this study, chemical composition of Barberry integerrima seed and physicochemical properties and fatty acids composition of its oil were determined. The seeds contained 11.4 % oil and protein, moisture, crude fiber and ash contents were 17.0%, 19.1%, 48.8% and 2.9%, respectively. The main fatty acids recognized by gas chromatography were linolenic (ω-3), linoleic (ω-6) and oleic (ω-9) acid (38.3, 37.0, 15.5%, respectively). The density and refractive index of the extracted barberry seed oil were 0.821 and 1.4780, respectively. FFA (% as oleic acid), acid value (mg KOH/g oil), iodine value (g I2/100 g oil), saponification number (mg KOH/ g oil), and unsaponifiable matter content (%) of the extracted oil from Barberry integerrima seeds were 0.70, 1.4, 180.0, 197.2, and 2.3, respectively. Color of extracted crude oil exhibited red unit 4.9, yellow unit 18.6 and blue unit 1.9, respectively. Total phenolics compounds (mg Gallic acid/kg oil), total tocopherols (mg/kg oil) and total sterols (mg/100g oil), were 323.0, 111.1 and 762.3, respectively. Specific extinctions at 232 nm (K232) and 270 nm (K270) and R-value (K232/K270) were 3.9, 2.2 and 1.8, respectively. The present study revealed that Barberry integerrima seed oil can be a valuable source of oil for food, pharmaceutics and cosmetics uses.
Dec 2025 DOI 10.14302/issn.2769-2264.jw-24-4937
Otchere BernardCorresponding author
Access to potable and quality water in most rural communities is low such that over 2.2 billion people worldwide are negatively affected. The increasing population in Fiapre and the inconsistent water supply by the Ghana Water Company Limited (GWCL) have forced most residents to resort to alternative groundwater sources such as boreholes, wells, etc. Yet, many residents use these sources of water unaware of the quality of the water and its potential health implications. This study assessed drinking water quality in Fiapre by calculating its Weight Average Water Quality Index (WAWQI) and investigating potential risk factors associated with contamination through a cross-sectional study and laboratory analysis of various physicochemical and microbiological water quality parameters. WAWQI was used to compute parameters using 10 factors including pH, electrical conductivity, temperature, TDS, phosphate, chloride, total hardness, nitrate, alkalinity, and faecal coliform. The findings revealed that the pH level of water, phosphate concentration, and fecal coliform count surpassed the recommended thresholds set by the World Health Organization (WHO) for safe drinking water. Although levels of electrical conductivity, TDS, nitrate, total hardness, and chlorine kept changing from one water source to another, the difference was not significant apart from phosphate and fecal coliform which shows a significant difference between the sachet water sources and other water sources (P<0.05). The study outcomes demonstrated that the overall water quality is predominantly categorized as good to fairly good, with the highest Water Quality Index (WQI) value reaching 87.84% and the lowest recorded at 54.81%. Therefore, to improve the water quality in the municipality, local management agencies should pay attention to the microbiological quality of the water sources. The study recommends regular handwashing practices, hygienic surroundings of the water source, and drinking water treatment to reduce the possible risk factors associated with the contamination of the water sources.
Jul 2025 DOI 10.14302/issn.2769-2264.jw-25-5578
Nyamaizi SylviaCorresponding author
Wetland encroachment due to agricultural land use practices (LUPs) adversely affects water quality in wetlands mainly through agricultural runoff. This study was conducted in Lubigi wetland in Uganda to (1) determine the effect of the agricultural LUPs on water quality and (2) understand the relationships between different water quality indicators and different agricultural LUPs existing in the wetland. The eight LUPs included in this study were perennial crops i.e. banana farming and sugarcane farming, annual crops i.e. maize farming and tomato farming, livestock farming which included a mixture of cows, goats, and sheep, undisturbed dense natural vegetation, reference wetland and the river. Water samples collected from the different LUPs were analyzed in the laboratory for selected physicochemical and biological water quality parameters. The water samples were analyzed for a variety of properties, including pH, electrical conductivity, total hardness, Ca-hardness, Mg- hardness, and concentrations of dissolved oxygen, calcium, magnesium, fluoride, total nitrogen, nitrates, ammonium, phosphates, potassium, total coliform, and Escherichia coli (E. coli), chemical oxygen demand, biological oxygen demand, total organic carbon, total dissolved solids, chlorides, sulphates, total phosphorus, and turbidity levels. The results suggested that the different LUPs influenced several water quality parameters. Dissolved oxygen was lowest in banana fields and the river at 2.57 mg/L and 3.44 mg/L respectively than other LUPs which limits survival of aquatic organisms. Biological oxygen demand, chemical oxygen demand and total organic carbon were high in the river water with values = 69.67 mg/L, 351.67 mg/L, 117.33 mg/L respectively indicating high organic pollution. We detected nutrient pollution in water from tomato and sugarcane fields which showed high concentrations of nitrates. The concentration of ammonium in river water (10.40 mg/L) was high, indicating nitrogen contamination. In all LUPs, Escherichia coli and total coliforms had high counts exceeding 2000 CFU/100mL which indicated elevated microbial pollution from livestock waste and agricultural runoff. Cluster analysis revealed distinct clusters influenced by varying water quality parameters. These findings show that agricultural LUPs in Lubigi wetland are significantly contributing to water pollution through microbial contamination, nutrient, and organic matter accumulation, which increases the potential for eutrophication and renders the water unsafe for drinking and domestic use. Implementing best management practices (BMPs) is essential for the sustainable use and management of the wetland.
Jul 2021 DOI 10.14302/issn.2769-2264.jw-21-3870
Danielly da Silva Lopes IrisCorresponding author
Universidade Federal Rural da Amazônia. Instituto Sócio Ambiental e Recursos Hídricos. Avenida Presidente Tancredo Neves, 2501-Terra Firme. Belém-PA. Brasil. CEP: 66077-530.
In this study, were multivariate analysis of the waters of the Arienga and Murucupí rivers located near an area of intense industrial activity in the Barcarena City, Pará State, Brazil. Were analyzed the variables temperature, pH, total dissolved solids, electrical conductivity, DO, BOD, ammoniacal-N, nitrite-N, nitrate-N, phosphate, sulfate and total hardness in four sampling campaigns in the year 2011. This amazon rivers presented physicochemical characteristics well heterogeneous, but similar behaviors for the variables pH, temperature and DO in the extensions evaluated, that is, increase in the source-mouth direction, with variations from 4.77 to 7.33 and 5.51 to 7.3, 25 to 31°C and 27 to 32°C and from 4.4 to 7.98 mg.L-1 and 1.17 to 6.55 mg.L-1 for the Arienga and Murucupi rivers respectively. In addition to these characteristics, the Arienga River also presented an increase for ammoniacal-N, nitrite-N, nitrate-N and hardness in the dry period, with variations from 0.014 to 6.336 mg.L-1, 0.005 to 0.334 mg.L-1, 0.009 to 4.818 mg.L-1 and 1.146 to 14.389 mg.L-1 respectively. In general, Murucupí River presented different physicochemical characteristics that are coherent with the local scenario, where the launch domestic effluents and the environmental impacts caused by industrial waste are visible and recurrent respectively.
Apr 2021 DOI 10.14302/issn.2576-6694.jbbs-21-3773
Jana SnehasisCorresponding author
Trivedi Science Research Laboratory Pvt. Ltd., Thane (W), Maharashtra, India.
L-tryptophan is an essential α-amino acid, necessary for the normal growth in newborns, nitrogen balance in adults, protein synthesis, precursor of serotonin, melatonin, niacin, and albeit inefficiently in human, also the precursor of indole alkaloids and auxins in plants. This current study was designed to investigate the impact of the Trivedi Effect®-Biofield Energy Healing Treatment (Blessing) on the structural properties and the isotopic abundance ratio of L-tryptophan using LC-MS analytical technique. L-tryptophan sample was divided into two parts, one part of L-tryptophan was considered as the control sample (no Biofield Energy Treatment was provided), while the second part was treated with the Trivedi Effect®-Consciousness Energy Healing Treatment/Blessing remotely by a renowned Biofield Energy Healer, Dahryn Trivedi and termed as the treated sample. The mass spectra of both the control and treated samples with respect to the chromatographic peak at retention time (Rt) 2.1 minutes exhibited the mass of the molecular ion peak adduct with hydrogen ion at m/z 205.08 (calcd for C11H13N2O2+, 205.1), along with low molecular fragmented mass peaks at m/z 188, 159, and 102 for C11H12N2O2+, C10H11N2+, and C8H6+, respectively were also observed. The isotopic abundance ratio of PM+1/PM (2H/1H or 13C/12C or 15N/14Nor17O/16O) in the treated L-tryptophan was significantly increased by 35.93% compared with the control sample. Hence,the 13C, 2H, 15N, and 17O contributions from C11H13N2O2+ to m/z 206.08 in the treated L-tryptophan was significantly increased compared to the control sample. It could be hypothesized that the changes in the isotopic abundance and mass peak intensities due to the modification in nuclei possibly through the interference of neutrino particles using the Trivedi Effect®-Consciousness Energy Healing Treatment. The Biofield Energy Treated/Blessed L-tryptophan with increased stable isotopic abundance ratio might have changed the physicochemical properties with higher force constant in the molecule. The new form of treated L-tryptophan would be a better and more stable in the supplements, nutraceutical, and pharmaceutical formulations, which would be advantageous for the prevention and treatment of pellagra, depression, kynurenine. It could also maintain the normal label of tryptophan and avoid increase of its metabolite, lower the neurotoxin and a metabotoxin behavior, glutaric aciduria type I (glutaric acidemia type I) disorder, eosinophilia-myalgia syndrome (EMS), incurable and sometimes fatal flu-like neurological condition, etc. As tryptophan is the precursor for the plant hormones like indole alkaloids and auxins, hence, this treated L-tryptophan would be advantageous for the improvement of yield, productivity, and quality of crops and other plants.
Feb 2021 DOI 10.14302/issn.2689-2855.jan-21-3745
Jana SnehasisCorresponding author
Trivedi Science Research Laboratory Pvt. Ltd., Thane (W), Maharashtra, India.
Cholecalciferol (vitamin D3) is used nowadays in nutraceuticals regarding the prevention and treatment of vitamin D deficiency and associated diseases. This study was done to analyse the effect of the Trivedi Effect® - Energy of Consciousness Treatment on the physicochemical, thermal, and spectral properties of cholecalciferol using PSA, PXRD, DSC, TGA/DTG, FT-IR, and UV-Vis analysis. For this study, the cholecalciferol sample was divided into control/ untreated and Biofield Energy Treated vitamin D3. The treated vitamin D3 sample received Biofield Energy Treatment (the Trivedi Effect®) remotely for ~3 minutes by Mr. Mahendra Kumar Trivedi, who was located in the USA, while the test samples were located in the research laboratory in India. The treated sample was designated as the Biofield Energy Treated sample. The PSA analysis showed that the particle size values at d10, d50, d90, and D(4, 3) of the treated sample were significantly decreased by 5.80%, 16.49%, 17.52%, and 16.23%, respectively compared to the control sample. However, the specific surface area of the treated cholecalciferol was significantly increased by 7.26% compared to the control sample. Besides, the PXRD analysis revealed that the relative intensities regarding the characteristic diffraction peaks in the treated sample were significantly altered from -42.56% to 22.42%, along with -41.69% to 72.71% alterations in the crystallite sizes, compared with the control sample. Also, the treated sample showed 2.80% decrease in the average crystallite size. The DSC analysis showed a slight increase (0.24%) in the melting point of the treated sample along with 3.68% increase in the latent heat of fusion (ΔH) compared to the control sample. Also, the decomposition temperature of the treated sample was decreased by 0.29%, whereas the ΔH was increased by 5.79%, compared to the control sample. Moreover, the TGA/DTG analysis revealed the significant decrease in weight loss in the 1st and 3rd step of degradation of the treated sample by 18.58% and 89.81%, respectively, along with 1.83% increase in the maximum thermal degradation temperature compared with the control sample. Overall, the thermal stability of the treated cholecalciferol sample was observed to be increased in comparison to the control sample. Thus, the Trivedi Effect® might be used to produce a different polymorph of cholecalciferol, which possesses the improved qualities in terms of appearance, dissolution, absorption, bioavailability, and thermal stability as compared with the untreated sample. Thus, the Biofield Energy Treated cholecalciferol might be used in designing of better nutraceutical and pharmaceutical formulations possessing improved therapeutic response regarding the treatment of vitamin D deficiency associated diseases.
Oct 2020 DOI 10.14302/issn.2377-2549.jndc-20-3583
Michałowski TadeuszCorresponding author
The Generalized Approach To Electrolytic Systems (GATES) provides the best possible thermodynamic formulation of redox and non-redox, equilibrium and metastable, mono-, two- and three-phase systems, with all attainable/pre-selected physicochemical knowledge involved, without any simplifying assumptions made for calculation purposes, where different species may occur in batch or dynamic systems, of any degree of complexity. The Generalized Electron Balance (GEB) is the key concept completing the set of algebraic balances referred to redox systems, described according to GATES/GEB ⊂ GATES principles. The GEB, considered as the law of Nature, is fully compatible with charge and concentration balances, and relations for the corresponding equilibrium constants. Within GATES, the electrolytic systems are resolvable with use of MATLAB, or other iterative computer programs, if all necessary physicochemical knowledge is attainable.
Aug 2020 DOI 10.14302/issn.2835-513X.ijl-20-3457
Gupta AnjuCorresponding author
Department of Mechanical, Industrial and Manufacturing Engineering, University of Toledo, Toledo, OH 43614, USA
PEGylation is a well-established strategy for improving the target specificity, circulation time and stability of liposomes, thereby improving their stealth properties. This brief review provides an insight on the composition of PEGylated liposomes and the characteristics that dictate the functionality of PEGylated liposomes such as surface density, molecular weight, presence of linkers and acyl groups. Physicochemical techniques used to characterize the PEG liposomes and test their stability are also discussed along with their clinical implications. This review provides the readers with a broad range of understanding of various PEGylated lipids, techniques to access their stability in liposomal formulations and state-of -the-art development of PEGylated liposomal formulations.
Oct 2019
Radwan EHCorresponding author
Department of Zoology, Faculty of Science, Damanhour University, Egypt.
Pesticides are the major source of concern as water pollutants. Persistent organochlorines can accumulate in food chains. Chlorpyrifos (O,O -diethyl O -(3,5,6-trichloro-2-pyridinyl) phosphorothioate; CAS No. 2921-88-2; CPY). CPY is a widely used organophosphorus insecticide that is available in a granular formulation for treatment in soil. Pesticides are used to control a wide range of pests including Mosquitoes. Mosquito borne diseases infect millions of people every year globally. The aim of current study was to screen the fresh water pollutants, water quality parameter in irrigation water from El Mahmodia stream, El-Beheira Governorate, Egypt and to determine the adverse effects of Chlorpyrifos on the larvae of Culex mosquito larvae as bio-indicator. The LC95 of Chloropyrifos insecticide was 6331.30 at 24h and increased to 230506.4 after 48h of exposure to the Chloropyrifos insecticide. It is noted that the effect of the exposure time of Chloropyrifos insecticide on the LC50, LC25 and LC95 values had a synergistic interaction with time, as it increased after 48h of exposure when compared to 24 h of exposure. The 0.09 ppm concentration of Chloropyrifos had no effect on the second instar Culex larvae, as there is no mortality over time; the same result is also with the control 0 ppm. There is no effect after 72, 96h of exposure of the population to the detected insecticide. This study concerns with studying the pollutants along El Mahmodia stream in El Beheira governorate in Abo Homs city with its abundance during the four seasons (2016-2017), as well as studding the physicochemical parameters in it. Another concern of this study is estimating the effect of one of this pesticides (Chloropyrifos) insecticide on the second instar Culex mosquito larvae, determining the lethal concentration of this insecticide on the Culex larvae. Along the study area, pesticides are used within a high ratio on the agriculture scale with its four main categories organophosphates, organochlorine, pyrthoid and carbamates. Organophosphates and organochlorine are used at a wide range. Pollutants measuring achieved by using GC-MS as water samples collected seasonally and analyzed, there is a big number of Pollutants which was found as well as other compounds which are banned, such as DDT. The physicochemical parameters Turbidity, COD, BOD in El Mahmodia stream exceeded the desirable limits of (Egyptian Law 48/1982), (WHO, 1993) and (FAO, 1985) although the other parameters as EC, PH, DO,TDS TSS are to be within the permeable limits. HCO3, NH4. Cu also was found to exceed the desirable limits while, Pb, Mn, Fe and Cd within the permeable limits. Chloropyrfos as an organophosphate pesticide used in the present study which was found with 0.09 mg/l in the stream water, used to estimate its effect on the Culex mortality, determining LC25, LC50 and LC95. The experiment continued for 96 h but after 48 h there is no effect of Chloropyrfos on Culex larvae. The experiment began with 20 second instar Culex larvae immersed in 100 ppm, 10 ppm, 1 ppm, 0.1 ppm and finally 0.09 ppm of Chloropyrfos insecticide with five repeats to each concentration, it is noted that the lethal concentration increase after 48h of experiment, the larval mortality decrease with time.
Jun 2019 DOI 10.14302/issn.2471-2140.jaa-19-2747
M. S. López-CortezCorresponding author
Numerous studies have reported the health benefits of consuming fruits and vegetables that contain antioxidant properties. Within the group of fruits considered exotic, some are accessible and only consumed in their place of origin, such as soursop, noni, kiwi, pitahaya, and others. Anacardiumoccidentale, cashew, is a crop native to the Brazilian northeast that has excellent medicinal and nutritional properties. Because few studies have characterized cashew produced in Mexico, in the present work, the physicochemical properties and antioxidant capacity of cashew apple (red and yellow varieties) and its nut were studied. The content of total phenolic compounds and the antioxidant capacity were higher in the nut (174.19±20.98 GAE mg/100 g db) while cashew red pulp showed a superior value of the phenol content (159.75±12.91 GAE mg/100 g db) to that of yellow cashew pulp (151.9±5.23 GAE mg/100 g db). A high value was obtained for the TPC of the husk of cashew nut (74.30 mg GAE/g) compared with those of the kernel and false fruit. Red cashew presented a higher antioxidant capacity at 77.65 μmol Trolox/g and was superior to that of the kernel (38.52±2.9 μmol Trolox/g). Because cashew apple is usually discarded, a marmalade based on the pulp is proposed as an alternative for its conservation because it has a high content of phenolic compounds that is conserved for six weeks of shelf life.
Feb 2019 DOI 10.14302/issn.2377-2549.jndc-18-2507
Jana SnehasisCorresponding author
Trivedi Science Research Laboratory Pvt. Ltd., Thane (W), India
Hydroxypropyl β-Cyclodextrin (HPBCD) used in food, pharmaceutical, chemical industries, as well as environmental, and agriculture engineering. But the major issue related to HPBCD is the low solubility profile. In this study, the influence of the Consciousness Energy Healing Treatment (the Trivedi Effect®) on the physicochemical properties of HPBCD was evaluated using spectroscopic and calorimetric analytical techniques. The test sample (HPBCD) was divided into control sample and treated sample. The control sample did not receive the Biofield Energy Treatment. Whereas, the treated sample received the Biofield Energy Treatment remotely by a renowned Biofield Energy Healer, Dahryn Trivedi. The particle size values of the treated sample were decreased by 3.28%(d10), 1.36%(d50), 0.45%(d90), and 1.04%{D(4,3)}; therefore, the specific surface area was increased by 1.9% compared with the control sample. The evaporation temperature of the treated HPBCD sample was significantly decreased by 19.89%; however, the latent heat of evaporation and latent heat of fusion were significantly increased by 56.27% and 47.41%, respectively compared with the control sample.The total weight loss in the treated HPBCD was decreased by 5.11%; whereas, the residue amount was significantly 309.67% more compared to the control sample.The results indicated that the Trivedi Effect® might have produced a new form of HPBCD which may show better thermal stability, solubility, dissolution rate, and bioavailability. This new form of HPBCD would be more useful for improvement of solubility of the lipophilic drug, preparation of cholesterol free food products, weight loss supplements, anti-obesity medication, stabilize volatile and unstable compounds, and other manufacturing industry using it as a raw material.
Oct 2018 DOI 10.14302/issn.2637-6075.jpae-18-2336
C.N Angaye TariwariCorresponding author
Department of Biological Sciences, Faculty of Science, Niger Delta University, Wilberforce Island, Bayelsa State, Nigeria.
Environmental impact of anthropogenic activities from industrial sources, have become a threat to biodiversity. Water samples were collected from rivers around the flow station, and analysed from some physicochemical parameters and hydrocarbon contents. Result of the physicochemistry was reported for: pH (6.58± 0.04 - 6.76±0.01), conductivity (168.30±13.98 - 194.57±3.78 µS/cm), conductivity 8.29±0.04 - 10.66±0.02 NTU, salinity (0.07±0.00 - 0.09± 0.00 mg/l), and Total Solids (83.96±1.49 - 103.66±0.60mg/l). Other elemental analysis includes: sulphates (2.43±0.01 - 4.28 ±0.02 mg/l), nitrates (0.19±0.01 - 0.28±0.01 mg/l), carbonates (1.14±0.07 - 2.06±0.07 mg/l), calcium (8.45±0.10 - 11.70±0.25 mg/l), magnesium (1.14±0.07 - 2.56±0.03 mg/l), and sodium (4.37±0.15 - 5.62±0.03 mg/l). The values of THC and TPH were 0.92±0.08 - 1.51±0.03, and 0.37±0.13 - 0.76±0.07 mg/l respectively. Generally, the result indicated mild level of contamination in terms of Hydrocarbon contents. However, diagnostic data emerging for physicochemistry and some elemental property indicates the water is unfit for consumption. Notwithstanding, the order on contamination were reported as; downstream > midstream > upstream. Therefore this study concludes that there should be frequent monitoring of the recipient water bodies associated with the flow station in order to check anthropogenic activities, and conserve biodiversity.
Feb 2018 DOI 10.14302/issn.2637-6075.jpae-17-1890
Chibueze Izah SylvesterCorresponding author
Department of Biological Sciences, Faculty of Science, Niger Delta University, Wilberforce Island,Bayelsa State, Nigeria.
Cassava is the fourth largest staple food after rice, wheat and maize. Cassava is produced in the tropical and sub-tropical countries. Currently, the global production of cassava is about 215,436,496 tons. Out of these, Nigeria accounts for 20.3%, being the largest producing nation. During processing of cassava flour (Gari), three main wastes are generated including cassava mill effluents (CME), solid and gaseous emission. This paper reviews the impacts of CME in Nigeria. The study found that CME’s physicochemical quality often exceeds the limit for effluents discharge onto land and surface water as recommended by Federal Environmental Protection Agency (FEPA), Nigeria. CME alters the quality of soil and water with regard to physicochemical, heavy metal and microbial characteristics. CME can induce toxicological effects on the environments and its biota including humans, fisheries, flora and fauna. The impacts are mostly associated with physicochemical (viz: odour, cyanide, acidic, dissolved oxygen, biological and chemical oxygen demand, conductivity) and heavy metals characteristics. Therefore, there is the need for treatment and sustainable management strategies of CME through biotechnological advancement.
Nov 2014 DOI 10.14302/issn.2377-2549.jndc-14-391
Adil Hashmi AtharCorresponding author
Department of Chemistry. Jamia Millia Islamia (Central University), New Delhi-110025, INDIA
Oxidation of 1-Proponol, 1-butanol 1-Hexanol and benzyl alcohol using chloromethylated polystyrene (6% Cross link) DMG (Dimethylglyoxime) copper complex or Poly(S-DVB)-DMG-M Where M= Cu) as catalyst and tert.butylhydroperoxide(TBHP) as oxidant, was studied. The polymer supported Cu Complex was characterized by some physicochemical and spectroscopic methods like elemental analysis IR Scanning electron micrographs (SEM). In the oxidation of 1-propanol, 1-butanol, 1-hexanol and benzyl alcohol. It was found that Product yield of these alcohols corresponding the order 1-Butanal >1-hexanone >Benzyldehyde > 1-Propanone. Kinetic data indicates that catalyst could be recycled without significant degradation of polymer